CCNPR Disposable Bed Pads - Hot Air Surface PE Film | China Suppliers & Factory Direct Quality
| Type | Material Specifications | Size (cm) | Weight (g) | Absorption Capacity (ml) | Packaging Specifications |
|---|---|---|---|---|---|
| Standard |
1. China Pulp + China SAP 2. Hot air non-woven fabric 3. PE Backing Film |
45*60 | 30 | 300 | 50pcs/bag, 6bag/package |
| 60*60 | 35 | 400 | 20pcs/bag, 12bag/package | ||
| 60*90 | 50 | 500 | 10pcs/bag, 16bag/package | ||
| 90*90 | 125 | 1000 | 6pcs/bag, 12bag/package | ||
| 90*180 | 130 | 1500 | 4pcs/bag, 12bag/package |
The upgrade ladder, step by step:
| Step from the base pad | Material change | What the customer receives | What it adds to cost |
|---|---|---|---|
| One | Spunbond surface replaced by hot air nonwoven | A softer touch and more air movement across the top | A higher material cost per pad |
| Two | PE bottom film kept as it is | The same strike-through protection as the base pad | Nothing saved, and no air movement at the base |
| Three | A composite bottom film on request | A premium build for high end programmes | Priced per order, not listed on this page |
This is a comfort change, not a capacity change. Printed grammage and absorbency values here match the base model size for size, so it should never be sold as a stronger pad. Present it as the same protection with a better surface, and let the buyer price that comfort.
Skin contact is where surface material earns its money. A support surface stays against skin for hours, and surface feel is what end users describe when they talk about a pad, whether the complaint is good or bad. Send both surfaces in one parcel and let the trial group work through them.
Breathability stops at the bottom film. Air crosses the hot air surface but not the PE layer beneath, so the pad ventilates less than its top side suggests. Tell a customer this before they run their own trial and reach the same conclusion without you in the room.
Cost decides where the material belongs. The specification note on this page records that hot air fabric is rarely used in standard underpads because of cost, and normally pairs with a composite film on premium lines. Show a same size comparison against the base pad so the buyer can weigh surface against budget.
- Request a hot air surface sample and a spunbond sample in 60 by 90 cm, both from one production lot.
- Weigh both, then check each against the 50 g figure this page lists for that size.
- Run 500 ml of saline over the hot air sample, then inspect the bottom film for wetness after five minutes.
CCNPR is not a fully breathable pad and not a higher absorbency pad. Choose it for surface feel. Choose a larger footprint or a composite bottom film when capacity is the question, and compare it against CCNPP1 when fixation matters more than touch.
Share your target size and pack configuration and we will quote the hot air build next to the standard one, so the cost of the softer surface is clear from the first reply. Samples of both surfaces ship in one parcel on request.
Wholesome is a leading manufacturer, supplier and exporter of quality hygiene products, specializing in wholesale orders. SNUGRACE are widely recognized for their superior comfort, rapid absorbency and superior skin-friendliness.
The primary difference is the top sheet material. While standard underpads utilize spunbond nonwoven fabric, CCNPR features a premium hot air nonwoven surface that provides a softer, cloth-like touch and enhanced top-layer airflow.
No, CCNPR is designed as a comfort upgrade rather than an absorbency increase. The core grammage and absorption capacities match the standard base pad size-for-size.
While the hot air nonwoven top sheet allows air passage, the standard PE bottom backing film acts as an impermeable barrier to prevent liquid strike-through. For full breathability, a composite breathable film can be requested.
Yes, we provide OEM and wholesale customization. We can adjust sizes, weights, SAP ratios, and package configurations according to your specific technical sheets or reference samples.
We can ship sample packs containing both 60x90 cm standard spunbond and CCNPR hot air nonwoven underpads from the same production lot for direct weight, softness, and absorption trial testing.